Dr. H. Siddhi Jailani

Teaching

Educational Background

Work Experience

Research

Areas Of Research Interest

• Composite Materials
• Powder Metallurgy
• Machining
• Tribology

Research Publications

International Journal

• C.K. Arvinda Pandian and H. Siddhi Jailani, “Formulation and characterisation of jute fabric–linen fabric–fumed silica–epoxy hybrid laminates”, The Journal of The Textile, Institute, DOI: 10.1080/00405000.2020.1866271, 2021.
• J. Mahashar Ali, H. Siddhi Jailani, M. Murugan and S. Mohamed Fahad, “Optical Surface Roughness Evaluation of Ground Specimens Using Speckle Line Images”, SAE Technical Paper, 2020-28-0514.
• C.K.Arvinda Pandian and H. Siddhi Jailani, “Linen Fabric-Jute Fabric-Fumed Silica-Epoxy Sandwich Laminate: AWJ Machining and Multi-Response Optimisation”, Silicon, doi:10.1007/s12633-020-00515-0.2020.
• S. M.Vinu Kumar , K. L. Senthil Kumar , H. Siddhi Jailani and G. Rajamurugan, ”Mechanical, DMA and Sound Acoustic behaviour of Flax woven fabric reinforced Epoxy composites, Materials Research Express,7,(2020) 085302.
• S Jeavudeen, H Siddhi Jailani and M Murugan, “Effect of process parameters in the machining of Titanium alloy and high speed steel in powder mixed electrical discharge machining process”, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2019.12.156,2020.
• S. Jeavudeen, H. Siddhi Jailani and M. Murugan,” Powder additives influence on dielectric strength of EDM fluid and material removal”, International Journal of Machining and Machinability of Materials (IJMMM), 22(1), pp. 47-61, 2020.
• J Mahashar Ali, H Siddhi Jailani and M Murugan, “Surface roughness evaluation of electrical discharge machined surfaces using wavelet transform of speckle line images”, Measurement, https://doi.org/10.1016/j.Measurement.2019.107029,2020.
• J. Mahashar Ali, H. Siddhi Jailani and M.Murugan, “Surface roughness evaluation of milled steel surfaces using wavelet transform of laser speckle line images”, Lasers in Engineering, 44 (4-6), pp. 371-384, 2019.
• C.K Arvinda Pandian and H Siddhi Jailani, “Dynamic and vibrational characterization of natural fabrics incorporated hybrid composites using industrial waste silica fumes”, International Journal of Polymer Analysis and Characterization, 24 (8), pp. 721-730, 2019.
• J. Mahashar Ali, H. Siddhi Jailani, Murugan Mariappan, Mangalnath Anandan and Vignesh Pavithran, “Vision based surface roughness characterization of flat surfaces machined with EDM”, SAE Technical Paper, 2019-28-0148, 2019.
• C.K.Arvinda Pandian and H.Siddhi Jailani, “development and investigation of jute/linen fibre reinforced polymer composite”, SAE Technical Paper, 2019-28-0171, 2019.
• M.Pervaz Ahmed and H. Siddhi Jailani, “Enhancing Wear Resistance of Cryo Treated Cu-Be2 Alloy”, Silicon, 11 (1), 105-115, 2019.
• S.Jeavudeen, H Siddhi Jailani and M Murugan,”Influence of Thermo-Electrical Property of Materials on Powder Mixed Electrical Discharge Machining”, FME Transaction, Volume 47, pp.518-523, 2019.
• J Mahashar Ali , H Siddhi Jailani and M Murugan,”Surface Roughness Evaluation of Milled Surfaces by Image Processing of Speckle and White-Light Images”, Advances in Manufacturing Processes, pp 141-151, 2019,
• S I Mohamed Suhail , J Mahashar Ali , H Siddhi Jailani and M Murugan,”Vision based system for surface roughness characterisation of milled surfaces using speckle line images”, IOP Conference Series: Materials Science and Engineering 402 (1), 012054,2018
• C K Arvinda Pandian and H. Siddhi Jailani, “Investigation of viscoelastic attributes and vibrational characteristics of natural fabrics-incorporated hybrid laminate beams” Polymer Bulletin, Volume 75,Issue5,pp. 1997–2014, 2018.
• Pervaz Ahmed Mouda and H Siddhi Jailani, “Effect of cryogenic treatment of copper electrode on Electro-Discharge Machining”, SAE Technical Paper, 2017-28-1962,2017.
• H.Siddhi Jailani, A.Rajadurai, B.Mohan and T.Sornakumar, “Sliding wear behaviour of Al-Si alloy–fly ash composites produced by powder metallurgy technique”, Industrial Lubrication and Tribology, Vol. 69(2), pp.241-247, 2017.
• C K Arvinda Pandian, H. Siddhi Jailani and A Rajadurai, “Natural fabric sandwich laminate composites: development and investigation”, Bulletin of Materials Science, Vol.40, pp.139-146, 2017.
• M.Pervaz Ahmed, H.Siddhi Jailani, S.Rasool Mohideen and A. Rajadurai, “Effect of cryogenic treatment on microstructure and properties of CuBe2”, Metallography, Microstructure and analysis, Vol.5, pp.528-535, 2016
• Pervaz Ahmed Mouda , Abdul Azeez, and H.Siddhi Jailani, “Sliding wear behavior of cryogenic treated copper beryllium alloy”, Applied Mechanics and Materials, Vol. 852, pp. 391-396,2016
• H.Siddhi Jailani, A.Rajadurai, B.Mohan, A. Senthil Kumar and T..Sornakumar, “Development and properties of aluminium silicon alloy fly ash composites”, Powder Metallurgy, Vol. 54, No. 4, pp.474-479, 2011
• H.Siddhi Jailani, A.Rajadurai, B.Mohan, A. Senthil Kumar and T.Sornakumar,“Multi- response optimisation of sintering parameters of Al- Si Alloy/fly ash composite using Taguchi method and grey relational analysis”, International Journal of Advanced Manufacturing Technology, Vol. 45, pp.362-369,2009

National Journal

• H.SiddhiJailani,A.Rajadurai, B.Mohan, T.Sornakumar,“Evaluation of drilled hole quality of Al Si alloy/fly ash composites produced by powder metallurgical technique”, Indian Journal of Engineering & Materials Sciences, Vol. 22, pp.414 – 420, 2015.

International Conference

• Siddhi Jailani H and S. Jeavudeen, “Effect of process parameters in machining of Titanium alloy and Tool steel in PMEDM process”, International Conference on Recent Advances in Materials and Manufacturing (ICRAMM 2019), September 12-14, 2019.
• D.Maniraj, C. K. Arvinda Pandian and H. Siddhi Jailani, Development öf Natural Fibres Reinforced Polymer Hybrid Composites”, International Conference on Automobile, Marine and Mechanical Engineering (ICAMME 2018), May 4-5, 2018.
• S. I. Mohamed Suhail, J. Mahashar Ali and H. Siddhi Jailani and M. Murugan, “Vision based system for Surface Roughness Characterization of milled surfaces using Speckle Line images”, 2^nd  International Conference on Advances in Mechanical Engineering,(ICAME-2018) March 22-24, 2018.
• J.Mahashar Ali, H. Siddhi Jailani and M. Murugan, “Surface Roughness Evaluation of Milled Surfaces by Image Processing of Speckle and White Light Images International Conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), 15-16 February 2018.
• M.Pervaz Ahmed and H.Siddhi Jailani, “Effect of Cryogenic Treatment of Copper Electrode on Electro-Discharge Machining”, SAE Paper No.2017-28-1962, International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility ” (ADMMS 2017), 19-21, July 2017.
• C.K.Aravinda Pandian, K.Koppiahraj and H.Siddhi Jailani, “Investigation and development of polymer composite incorporated natural fabrics: Jute and linen”,in Proc. of International Conference on Advancements in Polymeric Materials (APM 2016), 12-14, February 2016.
• M.Pervaz Ahmed, H.Siddhi Jailani and S.RasoolMohideen, ”Effect of Cryogenic Treatment on Copper Beryllium Alloy”, in Proc. of International Conference on Advances in Design & Manufacturing 2014 (ICAD&M’14),5 – 7, December 2014.
• H.Siddhi Jailani, A.Rajadurai,B. Mohan, A.Senthil Kumar and N.Mohan, ”Optimization of wire electrical discharge machining (WEDM) process parameters  using Taguchi Method and Grey Relational Analysis”, in Proc. of International Conference on  Active/Smart Materials (ICASM 2009),  7-9 January 2009.
• H.Siddhi jailani , A.Poomari , M.Adam khan and Manivelan,V, “Analysis of Hammer Crusher through Probability Distribution”, International   Conference on Responsive Supply Chain and organizational competitiveness  RSC-2004 , Coimbatore Institute of Technology,  Coimbatore, 5-7 Jan 2004.

National Conference

• H.Siddhi Jailani, A.Rajadurai, B.Mohan, T.Sornakumar, “Optimization of drilled hole quality parameters of Al Alloy/Fly ash composite produced by Powder Metallurgy Technique”, in Proc. of National Conference On Recent trends in Manufacturing Technology (RTMT 2011), 11-12, March 2011.
• H.Siddhi Jailani, A. Rajadurai, B.Mohan, T.Sornakumar,A.Senthil Kumar, J.RonaldAseer, “Optimisation of drilling process parameters using Taguchi Method”’, in Proc. of National conference on optimization techniques in Engineering Sciences and Technologies (OPTEST 2009), 27-28 March 2009.
• H.Siddhi Jailani, A.Rajadurai,B.Mohan, A. Senthil Kumar, “Development of Al alloy – fly ash composite using conventional powder metallurgy Technique”,in Proc. of National Conference on Advances in Robotics, Precision Engineering and Manufacturing Techniques (AIRPAM 2008), 14-15, March 2008.
• H.Siddhi Jailani, A.Rajadurai, B.Mohan, A.Senthil Kumar, “Effect of compacting pressure on Al alloy – Fly ash powder mixtures”, in Proc. of National Conference On Challenges and innovative practices in Design, Manufacturing and Materials (NCCIPDMM 2008), 12-13, March 2008.
• H. Siddhi Jailani, A.Poomari,,G.Kalyana Shuresh and M.Adam khan, “Reliability analysis in process industry-A case study”, Second National Conference On Mathematical and Computational Models,11-12 Dec 2003.

Ph.D. Scholars

Patents Details

Extension

FDPs / Seminars / Workshops / Conferences Attended

• Webinar on 10 steps to become an Entrepreneur on 13th May 2020 at BSA Crescent Institute of Science and Technology, Chennai
• Webinar on Blue ocean strategy for startups to swim across the Covid-19 on 7th May 2020 at BSA Crescent Institute of Science and Technology, Chennai
• Training Programme on Academic Leadership during 01–07, April 2019 at BSA Crescent Institute of Science and Technology, Chennai.
• Application of Ceramic & Polymer in 3D printing on 16th March 2019 at Anna University, Chennai.
• One-day national seminar on Ceramic Composites on 22nd Sep 2017 at Anna University, Chennai.
• Post Indo-Japan Symposium Workshop on Thermal Spray Coatings and Applications on 18 th July 2018 at IIT Madras.
• International conference on Advances in design, Materials, Manufacturing and surface engineering for mobility ADMMS 2017 during 19-21, July 2017 at B.S.Abdur Rahman Crescent University, Chennai.
• Induction Training Programme for Faculty during 2-6 July 2012 at B.S.Abdur Rahman University.
• Short term courses on Electron Microscopy (EM – 2008) during 6–8 Sep 2008 at NIT, Tiruchirappalli.
• Workshop on Ground water Awareness Programme on 18th March 2008 at Sethu Institute of Technology, Kariapatti.
• Faculty development programme conducted by Ripe during 28-29 June 2007 at Sethu Institute of Technology, Kariapatti.
• Workshop on Advances in Manufacturing Technology on 10th March 2007 at MIT Campus, Anna University, Chennai.
• Workshop on Recent Trends in Supply Chain Management during 26-27 May 2006 at NIT,
• Workshop on ANSYS during 15–17 Dec 2005 at Sethu Institute of Technology, Kariapatti.
• Short term training programme on CNC Milling Training Course during 2–26 March 2005 at MTAB- DENFORD Technology Centre, Chennai.
• Short term training programme on Cleaner Manufacturing in Industries during 25th Oct to 7th Nov 2004 at Amrita Institute of Technology, Coimbatore.
• Workshop on Metaheuristics on Operation Management during 6-8 Nov 2003 at Sethu Institute of Technology, Kariapatti.
• Short term courses on Calibration of dimensional measuring instruments and gauges during 16-20 Dec 2002 at Advanced Training Institute, Chennai.

FDP / Workshops Organized

• Faculty Development Programme on Engineering Graphics from 08 to 12, July 2014 at BSA Crescent Institute of Science and Technology, Chennai.
• National Level Workshop on Advanced Composite Materials – A research Perspective on 2nd & 3rd Feb 2018.

Additional Responsibilities

• Coordinator for B. Tech (Mechanical Engg.) Curriculum and Syllabus (R 2017)
• Department Coordinator for Academic Research (2017 – 2019)
• Department DAAC Committee member
• Member of Academic Council
• BoS Member
• Member of Placement and Training Advisory Committee