Dr. C.K. Arvinda Pandian

Teaching

Educational Background

Work Experience

Lecture Courses

• Design of Automotive Components
• Noise, Vibration & Harshness
• Automotive Safety
• Finite Element Analysis
• Design of Machine Elements
• Solid Mechanics (Strength of Materials)
• Mechanics of Machines
• Advanced Material Testing and Failure Analysis
• Automotive Engines
• Composite Materials for Automobile Applications

Research

Areas of Research Interest

• Green Composites
• Dynamic Characteristics of Composite Materials
• Vibration Behaviour of Polymer Materials
• Natural Fibre Fabric Polymer Laminates

Patent

• “Interior Door Skin Materials for Four Wheeler”, Application no. 201941020382 (Status: Published)
• “Joy Tab Steering”, Application no. 201941042365 (Status: Published)

Research Publications

International Journals

• C.K. Arvinda Pandian and H. Siddhi Jailani, “Formulation and characterisation of jute fabric–linen fabric–fumed silica–epoxy hybrid laminates”, The Journal of the Textile Institute, Vol. 113, pp. 151-158, 2022. Publisher:Taylor & Francis – (SCI & Scopus), IF: 1.880.
• C.K. Arvinda Pandian and H. Siddhi Jailani, “Linen Fabric-Jute Fabric-Fumed Silica-Epoxy Sandwich Laminate: AWJ Machining and Multi-Response Optimisation”, Silicon Vol.13, pp. 1239–1248, 2021. Publisher:Springer – (SCI & Scopus), IF: 2.670.
• Muraliraja R., Tamilarasan T.R., Udayakumar S., Arvinda Pandian C.K. (2021). The Effect of Fillers on the Tribological Properties of Composites. In: Hameed Sultan M.T., Mohd Jamir M.R., Abdul Majid M.S., Azmi A.I., Saba N. (eds) Tribological Applications of Composite Materials. Composites Science and Technology. Publisher:Springer, Singapore. (Book Chapter)
• C.Dineshkumar, C. K. Arvinda Pandian, T. R. Tamilarasan,S. Dhanush, andK. Abdur Rahman, “Active safety enhanced braking system with driver condition monitoring for passenger vehicles”,Publisher:AIP Conference Proceedings, 2283, 020030, (2020)https://doi.org/10.1063/5.0029214.
• C.K. Arvinda Pandian and H. Siddhi Jailani, “Dynamic and vibrational characterization of natural fabrics incorporated hybrid composites using industrial waste silica fumes”, International Journal of Polymer Analysis and Characterization, Vol. 24 (8), pp. 721–730, 2019, Publisher:Taylor & Francis – (SCI & Scopus), IF: 2.583.
• Arvinda Pandian and Siddhi Jailani, “Development and Investigation of Jute/Linen fibre Reinforced polymer composite”, SAE Technical Paper, 2019-28-0171, 2019, Publisher:SAE International – (Scopus).
• C.K. Arvinda Pandian and H. Siddhi Jailani, “Investigation of viscoelastic attributes and vibrational characteristics of natural fabrics-incorporated hybrid laminate beams”, Polymer Bulletin, Vol. 75 (5), pp. 1997–2014, 2018, Publisher:Springer – (SCI & Scopus), IF: 2.870.
• C.K. Arvinda Pandian, H. Siddhi Jailani and A. Rajadurai, “Natural Fabric Sandwich Laminate Composites: Development and Investigation”, Bulletin of Material Science, Vol. 40 (1), pp. 139–146, 2017. Publisher: Springer – (SCI & Scopus). IF: 1.783.

National Journals

• B. J. Praveen Kumar, C. K. ArvindaPandian,S.Meenambigai@Deepika, “Investigation of Mechanical Properties of Natural Fiber Reinforced Polymer Matrix Composite Using China Clay as Filler Material” International Journal for Science and Advance Research in Technology, 2016, Vol.2, pp 101-104
• S. Meenambigai@Deepika, P.S. Ambily, C. K. ArvindaPandian. “Mechanical and Durability Properties of UHSGC Using Industrial Waste” IJSART, 2016, 2(1), pp 87-92

Reviewer for International Journals

• Silicon (Springer)
• Mechanics of Advanced Materials and Structures (Taylor & Francis)
• Journal of Bionic Engineering (Springer)

International Conferences

• Nitish, C.K. Arvinda Pandian, “Two cavity mould tool for Blade Fuse” presented in International Virtual Conference on Science Technology, Engineering and Management (IVSTEM-2021) on 30th & 31st December 2021 organized by Department of Mechanical Engineering, M.Kumarasamy College of Engineering, Karur
• C.Dinesh Kumar, C. K. Arvinda Pandian, “Active Safety Enhanced Braking System with Driver Condition Monitoring for Passenger Vehicles” in proc. of International Conference on Recent Trends in Mechanical and Materials Engineering, Chennai, December 2019
• C.Dinesh Kumar, C. K. Arvinda Pandian, “Onboard Driver Monitoring System with Safety Enhanced Brake System”, in proc. of International Conference on Trends in Information Management Engineering and Sciences-2018, on 28th and 29th December 2018 at Malla Reddy College of Engineering, Hyderabad, Telangana
• D.Maniraj, C. K. Arvinda Pandian and H. Siddhi Jailani “Development of Natural Fibres Reinforced Polymer Hybrid Composites”, in proc. of International Conference on Automobile, Marine and Mechanical Engineering – 2018 on 5th May 2018 at Sri Venkateswara College of Engineering, Sriperambudur, Tamil Nadu
• C.K. Arvinda Pandian, K.Koppiahraj, H.Siddhi Jailani. “Investigation and development of polymer composite incorporated natural fabrics: Jute and linen”, in Proc. of International Conference on Advancements in Polymeric Materials (APM 2016) on 12-14 Feb 2016 at Ahmedabad, Gujarat

National Conferences

• K. Prabu, C. K. ArvindaPandian. “Experimental Investigation of Hybrid Magnetic Suspension, Performance and Energy Study”. in Proc. of “National Conference on Emerging Technologies in Design & Manufacturing, ETDM-2017” on 10.02.2017 held at Kalasalingam University, Krishnankoil, Tamil Nadu.
• C.K. ArvindaPandian, E. Prakash.“Prediction of Defects in Bearing Using Vibration Signature Analysis”, in Proc. of “National conference on Recent Advancements in Mechanical Engineering 2011(RAME 2011)” on 25.03.2011 held at K.S.Rangasamy College of Technology, Thiruchengode, Tamil Nadu.
• C.K. ArvindaPandian,E. Prakash.“Vibration Signature Analysis of Bearing Using WT”, in Proc. of “National conference on Recent Trends in Mechanical Engineering” on 23.03.2011 held at SSM College of Engineering, Komarapalayam, Tamil Nadu.
• C.K. ArvindaPandian, “Machining Fixture Optimization Using FEM and ANN”, “National conference on Advances in Mechanical Engineering” on 20.03.2009 held at Velammal College of Engineering and Technology, Madura, Tamil Nadu.

Faculty Development Programmes, Workshops and Webinars Attended

• Participated in 1 Week National Level Online FDP on “Fabrication, characterization and strengthening mechanism of composites”, from 13th to 18th December 2021 organized by the Department of Mechanical Engineering, AMET University, Chennai.
• Participated in 2 weeks National Level virtual FDP on “Advanced Materials and Manufacturing Technology”, from 27th September to 8th October 2021 organized by Department of Automobile Engineering, Easwari Engineering College, Chennai.
• Participated in 5-days online FDP on “Recent Trends in Materials and Manufacturing”that was heldfrom 02nd August 2021to 06th August 2021 organized by Department of Mechanical Engineering, Karpagam College of Engineering, Coimbatore.
• Participated in AICTE-ATAL Sponsored online FDP titled on “Multi-Objective Optimization and Product Innovation Through Triz” from12th July 2021to16th July 2021 organized by Department of Mechanical Engineering, Sri Shanmugha College of Engineering and Technology, Salem.
• Participated in One week online FDP on “Modern Industrial Technology in Mechanical Engineering”, that was heldfrom 02nd July 2021 to 08th July 2021organized by Department of Mechanical Engineering, Aditya Emgineering College, Surampalem, Andhra Pradesh.
• Participated in 7-days international FDP on “Post Covid-19 Challenges and Opportunities – A Global Prespective” during the period 6th June to 12th June 2020 organized Sakthi Institute of Information and Management Studies, Pollachi.
• Participated in two weeks live on-line FDP in “Application of Moodle LMS” during the period 11th July to 25th July 2020 organized by Department of Management Studies, BSACIST and D.Y. Patel College of Engineering, Akrudi.
• Participated in 14-days online FDP on “Materials Science and Nanotechnology (FDP-MSNT-2020)” during the period 3rd August to 17th August 2020 organized by Department of Chemistry, B.S. Abdur Rahman Crescent Institute of Science & Technology.
• Participated in the webinar series on “Finite Element Analysis” on 10.06.2020 – 12.06.2020 organized by Department of Mechanical Engineering, Dhanalakshmi College of Engineering, Chennai.
• Participated in the webinar titled “Aeroengines: Structural Engineers’ Nightmare” on 11th July 2020 organized by Department of Aerospace Engineering, B.S. Abdur Rahman Crescent Institute of Science & Technology.
• Participated in the webinar titled “Electric and Hybrid Electric Vehicles Powertrain” on 17th July 2020 organized by Department of Automobile Engineering, B.S. Abdur Rahman Crescent Institute of Science & Technology.
• Participated in the webinar titled “Experimental Aerodynamics, A Visual Tour” on 18th July 2020 organized by Department of Aerospace Engineering, B.S. Abdur Rahman Crescent Institute of Science & Technology.
• Participated in the webinar titled “Digital Manufacturing for an efficient Tomorrow” on 23rd July 2020 organized by Monotech Systems Limited, CAE CENTRE and Department of Automobile Engineering, B.S. Abdur Rahman Crescent Institute of Science & Technology.
• Participated in the webinar titled “CFD: A Colorful Virtual Universe” on 25th July 2020 organized by Department of Aerospace Engineering, B.S. Abdur Rahman Crescent Institute of Science & Technology.
• Participated six days faculty development program on engineering thermodynamics organised by department of automobile engineering B. S. Abdur Rahman Institute of Science & Technology, Chennai from 18th July to 23rd July 2016.
• Participated six days faculty development program on fluid mechanics conducted by aerospace engineering B. S. Abdur Rahman Institute of Science & Technology, Chennai from 27 June -July 2, 2016.
• Participated six days faculty development program on solid mechanics organised by department of mechanical engineering B. S. Abdur Rahman Institute of Science & Technology, Chennai from June 20-25, 2016.
• Completed training in Ansys design modeller and mechanical as a part of faculty development program from 4th – 8th may 2015 in B. S. Abdur Rahman Institute of Science & Technology, Chennai.
• Completed training in Ansys design modeller meshing and fluent al as a part of faculty development program from 18th – 23rd May 2015 in B. S. Abdur Rahman Institute of Science & Technology, Chennai.
• Participated workshop on Mobility safety held on 8th September 2015 at B. S. Abdur Rahman Institute of Science & Technology, Chennai.

Extension

Additional Responsibilities

• Coordinator for International Conference on “Emerging Trends in Design, Manufacturing, Materials and Thermal Sciences” – 2020
• Organized webinar on “Effect of Nano Additives on Automotive Engine Performance & Emission Characteristics” on 8th July 2020
• Department CIIC coordinator
• Department Academic Audit Committee Member
• Department NPTEL coordinator
• Developed Mechanics Laboratory
• Department Board of studies member
• Class Advisor
• Organized Two Days National Conference – “Emerging Trends on Automotive Technology” – ETAT 2016